Item #


Model Car Catalog

Price each

PTMC 1
Spark Plug Wire (1/25 scale) (please specify color) (2 ft.)  $5.75


(Blue, Red, Yellow, Black, Orange, Gray) 




PTMC 2
Heater Hose (1/25 scale) (Black) (2 ft.) $5.75




PTMC 3
Seat Belt Material (2.75" X 2.75")  $3.50


This Seat Belt Material is a fine cotton textured paper that looks great for seat belts and other belt/strap applications.  




PTMC 4
Spark Plug Wire Boots (1/25 scale) (Black) (8 per pack) $3.75


Use these at the spark plug locations on the engine to give  your wiring job that extra detail. 




PTMC 5
Detailing Wire (1/25 scale) (please specify color) (2 ft.) $5.75


This very fine wire can be used for detailing ignition systems, firewalls, computer leads, etc. (Blue, Red, Yellow, Black)




PTMC 6
Hood Pins (1/25 scale) (photoetch) (12 per pack)  $7.25


These hoodpins are one piece (pin and plate) photoetched parts.




PTMC 7
Nuts & Bolts/Bolt Heads (any scale)(photoetch) $12.75


(please specify size)


Use these any place a nut and bolt or bolt head should go.


(.040 - small), (.030 - smaller), (.020 - smallest)




PTMC 8
Drag Chute Kit (1/25 scale) (resin with material covering) $6.50


This is the ultimate in a 1/25 scale drag chute. Comes with inner resin chute core and outer textured material chute wrap. Another innovative product design by Pro Tech.




PTMC 9
State License Plate Set (1/25 Scale) (16 plates)  $3.75


(Michigan, Florida, New Jersey etc.) 




PTMC 10
Performance Plate Set (1/25 Scale) (16 plates)  $3.75


(Ford, Mopar, Dodge. Mustang, etc.) 




PTMC 11
State License Plate Set (1/43 scale) (16 plates) $2.75


(Michigan, Florida, New Jersey etc.) 




PTMC 12
Performance Plate Set (1/43 scale) (16 plates) $2.75


(Ford, Mopar, Dodge. Mustang, etc.) 




PTMC 13
Pre-Wired Distributor (1/25 scale) (machined aluminum) $11.75


(please specify color) (Blue, Red, Yellow, Black, Orange, Gray)




PTMC 14
Rubber Fuel Line (1/25 scale) (Black) (2 ft.) $5.75


Use this to duplicate the rubber (neoprene) fuel lines.




PTMC 15
License Plate Frames (1/25 scale) (photoetch) (8 per pack) $7.75




PTMC 16
License Plate Frames (1/43 scale) (photoetch) (8 per pack) $2.75




PTMC 17
5 Point Racing Harness (1/25 scale) (photoetch)    $4.75


PRO TECH's innovative design on our photoetched 5 Point Racing Harness makes it one of the easiest to assemble with very realistic results.  Comes complete with belt material.  




PTMC 18
Dzus Fasteners (1/25 scale) (photoetch) $7.25


Dzus fasteners are 1/4 turn (to lock/unlock) fasteners that are used on race cars, street cars etc.  They  are used primarily to hold down body panels like hoods, trunk lids etc.




PTMC 19
Braided Line (.018) (1/25 scale - fuel gauge, vacuum line,                  $7.50


brake line etc.) (18 ins.) 
                       PTMC 20
Braided Line (.025) (1/25 scale - fuel line etc.) (18 ins.) $7.50
                       PTMC 21
Braided Line (.035) (1/25 scale - fuel line etc.) (18 ins.) $7.50
                       PTMC 22
Braided Line (.045) (1/25 scale - fuel line, oil line, heater $7.50


hose etc.) (18 ins.)
                       PTMC 23
Braided Line (.060) (1/25 scale - oil line, heater hose etc.)  $7.50


(1 ft.)
                       PTMC 24
Braided Line (.080) (1/25 scale - radiator hose etc.) (1 ft.) $7.50






PRO TECH's Braided Line has been specially engineered to produce the most accurate looking braided line available, so you can achieve realistic results.  Also, all of our braided line is manufactured with a core, so line will not collapse when bent at sharp angles.  To complete your installation, use our machined aluminum hex fittings for that finished look.




                        PTMC 39
Hex Fittings (for .018 Braided Line) (photoetch) $11.50
                        PTMC 25
Hex Fittings (for .025 Braided Line) $10.75


(machined aluminum)  (8 per pack)
                        PTMC 26
Hex Fittings (for .035 Braided Line) $10.75


(machined aluminum)  (8 per pack) 
PTMC 27
Hex Fittings (for .045 Braided Line)  $10.75


(machined aluminum) (8 per pack)
PTMC 28
Hex Fittings (for .060 Braided Line)  $10.75


(machined aluminum) (8 per pack)
PTMC 29
Hex Fittings (for .080 Braided Line) $10.75


(machined aluminum) (8 per pack)




PTMC 30
Valve Cover T-Bolts (1/25 scale) (photoetch) $7.75
PTMC 31
Valve Cover Wing Bolts (1/25 scale) (photoetch) $7.75
PTMC 32
Spark Plug Wire Looms (1/25 scale) (photoetch) $7.75
PTMC 33
Holley Dominator Carburetor (1/25 scale) (metal cast) $3.75
PTMC 34
Cirello Magneto Kit (1/25 scale) (resin cast) $5.25
PTMC 35
Mallory Ignition Coil (1/25 scale) (resin cast) $3.75
PTMC 36
MSD 6 Ignition Box (1/25 scale) (resin cast) $3.75
PTMC 37
MSD 7 Ignition Box (1/25 scale) (resin cast) $3.75
PTMC 38
Supercharger Pulley Set (1/25 scale) (metal cast)  $5.25


(includes belt)




PTMC 39
Hex Fittings (.024 I.D.) (photoetch)  $11.50


Fittings for small line applications - fuel injection lines, nitrous lines, brake lines etc.  




PTMC 40
Oil Filters (1/25 scale) (metal cast) (8 per pack) $4.50
PTMC 41
Interior Door/Window Cranks (1/25 scale) (metal cast)  $4.25


(8 per pack)
PTMC 42
Air Cleaner (9x2 in. Custom Style) (1/25 scale) $10.75


(machined aluminum) (includes photoetch wing nut)
PTMC 43
Air Cleaner (14x3 in. Custom Style) (1/25 scale) $11.75


(machined aluminum) (includes photoetch wing nut)
PTMC 44
Air Cleaner (9x2 in. Edelbrock Style) (1/25 scale) $10.75


(machined aluminum) (includes photoetch wing nut)
PTMC 45
Part No Longer Available
PTMC 46
Air Cleaner (4x2 in. Nostalgia Style) (1/25 scale) $10.75


(machined aluminum) (includes photoetch wing nut)






PRO TECH's Machined Aluminum Parts are some of the finest in the industry.  They are machined to the tightest of tolerances to produce a high quality, highly accurate, scale correct part.  With PRO TECH's Machined Aluminum Parts you too can achieve realistic results.




PTMC 47
Throttle Linkage (1/25 scale) (photoetch)  $7.75


Use these throttle linkage arms for adding that extra detail to carburetors, injector hats, barrel valves etc. 




PTMC 48
Oil Breathers (1/25 scale) (machined aluminum) (2/pack) $5.75
PTMC 49
Oil Breathers (1/25 scale) (open element style, includes $5.75


filter element) (machined aluminum) (2/pack)
PTMC 50
Dual Remote Oil Filter Unit With Filters (1/25 scale)  $4.25


(metal cast)
PTMC 51
Under-Dash Gauges (gauge faces-black)  $7.75


(1/25 scale) (photoetch)
PTMC 52
Under-Dash Gauges (gauge faces-white)  $7.75


(1/25 scale) (photoetch)
PTMC 53
Street Rod Gauges (set #1) (gauge faces-black)  $6.75


(1/25 scale) (photoetch)
PTMC 54
Street Rod Gauges (set #1) (gauge faces-white)  $6.75


(1/25 scale) (photoetch)
PTMC 55
Street Rod Gauges (set #2) (gauge faces-black)  $6.75


(1/25 scale) (photoetch)
PTMC 56
Street Rod Gauges (set #2) (gauge faces-white)  $6.75


(1/25 scale) (photoetch)
PTMC 57
Colored Street Rod Gauges (set #1) (1/25 scale) $3.50


(gauges only - use with PTMC 53, PTMC 54)
PTMC 58
Colored Street Rod Gauges (set #2) (1/25 scale) $3.50


(gauges only - use with PTMC 55, PTMC 56)


Use these street rod gauges in various colors with street rod sets above for a custom touch.




PTMC 59
Drag Chute (1/25 scale) (resin cast) $3.75




PTMC 60
Gas Cap (hinge style) (1/25 scale) (metal cast) (2 per pack) $4.25


Great for funny cars, dragsters etc. or anywhere you want a cool looking cap, can also be used on oil and water tanks.




PTMC 61
Fuel Junction Block (1/25 scale) (resin cast) (with molded $3.75


on fittings)




PTMC 62
Tee Fitting (use with PTMC 20, PTMC 25) (metal cast) $2.00
PTMC 63
Tee Fitting (use with PTMC 21, PTMC 26) (metal cast) $2.00


Use Pro Tech's Tee Fittings anywhere you need to split a line.



Use for dual feed carburetors, tunnel ram set-ups, oil lines etc. Advanced modeling skills recommended.




PTMC 64
Pre-Wired Vertex Magneto (1/25 scale) (machined $11.75


aluminum) (please specify color - Blue, Red, Yellow, Black, Orange, Gray)




                        PTMC 65
Distributor Kit (1/25 scale) (machined aluminum/resin $6.75


cast)  Kit comes with machined aluminum base, resin cast cap and plug wire boot material for cap terminals. Use Pro Tech's Spark Plug Wire (PTMC 1) and Ignition Coil (PTMC 66) to complete your ignition system.




                        PTMC 66
Ignition Coil (1/25 scale) (machined aluminum)  $4.75


This factory style coil comes with coil wire boot for coil terminal.




                        PTMC 67
Barry Grant Demon Carburetor (1/25 scale) (resin cast) $3.75




                       PTMC 68
Flex Fan Kit 17 inch diameter (1/25 scale) (2 per pack) $7.75


(photoetch)
                       PTMC 69
Flex Fan Kit 15 inch diameter (1/25 scale) (2 per pack) $7.75


(photoetch)
                       PTMC 70
Flex Fan Kit 13 inch diameter (1/25 scale) (2 per pack) $7.75


(photoetch)




PTMC 71
Roll Bar Padding (1/25 scale) $5.75


Use Pro Tech's Roll Bar Padding to add more detail to those race car interiors.




PTMC 72
Tire Valve Stems (1/25 scale) (machined aluminum) (4 per $7.75


pack). Add that final detail to your wheel/tire assembly.




PTMC 73
Electric Fuel Pump with Filter (1/25 scale) (resin cast) $3.75


Comes with molded on fittings for the pump inlet/outlet


and bypass line.




PTMC 74
Holley Street Carburetor With Choke (1/25 scale)   $4.00


(3D Part)
PTMC 75 
Holley Street/Strip Carburetor (1/25 scale) (3D Part)     $4.00
PTMC 76
Monster Tachometer (1/25 scale) (3D Part) $6.00
PTMC 77
MSD Pro Mag 44 Magneto (1/25 scale) (3D Part)  $7.00




PTMC 78
Plug Boots/45 Degree (1/25 scale) (3D Part) (10 pcs.) $4.50


These Plug Boots are designed to be used with our Spark Plug Wire (PTMC 1). Ultimate in plug wire detailing.




PTMC 79
Plug Boots/90 Degrees (1/25 scale) (3D Part) (10 pcs.) $4.50


These Plug Boots are designed to be used with our Spark Plug Wire (PTMC 1). Ultimate in plug wire detailing.